Concrete Products
CONCRETAL Pro
Concretal PRO is a one component sol-silicate paint finish that is water-repellent and extremely weatherresistant the penetrates and fuses with concrete. It protects against chloride ion penetration and iscompletely UV stable so colors will not change.
MINERAL FINISHES FOR THE DECORATON AND PROTECTION OF OLD AND NEW CONCRETE
Achieving architectural design intent and protection of concrete may seem mutually exclusive. But theKEIM Concretal system pairs effective decades long protection and low maintenance with aesthetic goals of retaining the mineral character of concrete to achieve most any design aspiration.
UNIQUE BENEFITS OF CONCRETAL PRO
- Penetrates and fuses with concrete for permanent adhesion
- Protect structural steel from corrosion and freeze - thaw damage
- Blocks the penetration of water and chloride ions
- Extremely vapor permeable so concrete remains dryer
- Longest weather protection due to UV stable mineral binder
- Consolidates and strengthens concrete by chemical reaction
- Permanent, non - fading colors — guaranteed
- Crystalline anti-static finish will not attract or embed surface dirt
- Does not look “painted - on”, retains mineral look and appearance
- Available in both sand and coarse texture finishes
- Our most economical sol - silicate finish
CONCRETAL PRO
Sol-silicate based paint finish for new cast and tilt-up concrete that penetrates, fuses and forms apermanent bond. UV stable binder and pigments ensure non-fade colors for decades—guaranteed.Finish is water repellent, extremely weather resistant, not affected by acid-rain or de-icing chemicalsand colors do not change.
Colors:
White and light color shades, 100 minimum gallon order
Application:
Airless spray, brush or roller
Coverage on concrete:
275-325 SF per gallon
Packaging:
4 gallon plastic bucket/ 36 per pallet
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
| Greenguard Gold | YES |
| EPD | YES |
Downloads
CONCRETAL—PRO SAND TEXTURE BASE
Concretal PRO Sand Texture Base is ideally used to fill and hide moderate surface irregularities typically associated with cast or tilt-up concrete. The added texture fills in small cracks and voids, up to 1/32” and provides a more uniform texture to uneven or patched concrete surfaces. All specifications are the same as Concretal PRO above.
CONCRETAL—PRO Coarse TEXTURE BASE
Concretal PRO Coarse Texture Base is ideally used to fill and hide more pronounced surface irregularities typically associated with cast or tilt-up concrete or where significant patching has been done. The coarse texture fills cracks and voids up to 1/16” and provides a more uniform texture to uneven or patched concrete surfaces. All specifications are the same as Concretal PRO above.
CONCRETAL FIXATIVE/DILUTION
Concretal Fixative is a pure sol-silicate clear mixture used to dilute/thin the first coat of Concretal-W Sol-Silicate Paint. Fixative lowers the viscosity of the first coat to aid in deeper penetration, and addition up to 10% max of Fixative provides more open working time to help maintain a wet edge in warmer application temperatures. Use also as a pre-treatment and mild consolidation for aged and weathered concrete surfaces where uneven porosity and absorption are likely.
Colors:
Milky white, dries crystal clear
Application:
Airless spray, brush or roller
Coverage on concrete as a pretreatment:
100—200 SF per gallon
Packaging:
1.3 gal (5 liter) and 5.3 gal (20 liter) plastic jerry can
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
