Concrete Products
CONCRETAL — W HIGH PERFORMANCE FINISH
Concretal—W is a one component sol-silicate paint finish that is water-repellent and extremely weather resistant. It protects concrete against chloride ion penetration and is completely UV stable and will not change colors.
MINERAL FINISHES FOR THE DECORATON AND PROTECTION OF OLD AND NEW CONCRETE
Achieving architectural design intent and protection of concrete may seem mutually exclusive. But the KEIM Concretal system pairs effective decades long protection and low maintenance with aesthetic goals of retaining the mineral character of concrete to achieve most any design aspiration.
UNIQUE BENEFITS OF CONCRETAL—W
- Penetrates and fuses with concrete for permanent adhesion
- Protect structural steel from corrosion and freeze - thaw damage
- Blocks the penet ration of water and chloride ions
- Extremely vapor permeable so concrete remains dryer
- Consolidates and strengthens concrete by chemical reaction
- Permanent, non-fading and translucent colors—guaranteed
- Crystalline anti-static finish will not attract or embed surface dirt
- Does not look “painted - on”, retains mineral look and appearance
- Simple to refinish decades into the future
CONCRETAL - W SOL-SILICATE PAINT FOR CONCRETE
Sol-silicate based paint finish for all types of new and old concrete that penetrates, fuses and forms a permanent bond. UV stable binder and pigments ensure non-fade colors for decades—guaranteed. The finish is water repellent, extremely weather resistant, not affected by acid-rain or de-icing chemicals and colors do not change.
Colors:
White, black and full range of mineral colors plus monochromatic color concentrates
Application:
Airless spray, brush or roller
Coverage on concrete:
300-350 SF per gallon (low pigment stain covers more area)
Packaging:
1 gallon and 4 gallon plastic bucket
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
| Greenguard Gold | YES |
| EPD | YES |
| Sustainability Data Sheet | YES |
| C2C Cradle to Cradle | YES |
Downloads
CONCRETAL—W GROB SAND TEXTURE BASE
Concretal-W Grob is a sand texture basecoat for use with Concretal-W Sol-silicate Paint for Concrete when a uniform texture is desired. The added texture fills in small cracks and voids, up to 1/32” and provides a more uniform texture to uneven or patched concrete surfaces of all types. All specifications are the same as Concretal-W above.
CONCRETAL FIXATIVE/DILUTION
Concretal Fixative is a pure sol-silicate clear mixture used to dilute/thin the first coat of Concretal-W Sol-Silicate Paint. Fixative lowers the viscosity of the first coat to aid in deeper penetration, and addition up to 10% max of Fixative provides more open working time to help maintain a wet edge in warmer application temperatures. Use also as a pre-treatment and mild consolidation for aged and weathered concrete surfaces where uneven porosity and absorption are likely.
Colors:
Milky white, dries crystal clear
Application:
Airless spray, brush or roller
Coverage on concrete as a pretreatment:
100—200 SF per gallon
Packaging:
1.3 gal (5 liter) and 5.3 gal (20 liter) plastic jerry can
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
