Concrete Products
DESIGN METALLIC FINISH
Design Mineral Metallic Finish is a lustrous non-tarnishing finish for concrete and all types of masonry.Mineral oxide coated mica flakes add to the “glittery” finish with anatural matte sheen.
MINERAL FINISHES FOR THE DECORATON AND PROTECTION OF OLD AND NEW CONCRETE
Achieving architectural design intent and protection of concrete may seem mutually exclusive. But KEIMmineral systems pair effective decades long protection and low maintenance with aesthetic goals ofretaining the mineral character of concrete to achieve most any design aspiration, even glisteningmetallic finishes.
UNIQUE BENEFITS OF DESIGN METALLIC FINISH
- Penetrates and fuses with concrete for permanent adhesion
- Extremely vapor permeable so concrete remains dryer
- Consolidates and strengthens concrete by chemical reaction
- Longest weather protection due to UV stable mineral binder
- Permanent, non-fading and translucent colors—guaranteed
- Crystalline anti-static finish will not attract or embed surface dirt
- Stunning metallic luster that will not tarnish or discolor
- Retains mineral look and appearance of concrete and masonry
- Simple to refinish decades into the future
CONCRETAL - DESIGN METALLIC FINISH
The finish is water and weather resistant, not affected by acid-rain or de-icing chemicals and colors do not change nor lose their metallic luster.
Colors:
Metallic gold, silver, copper and other blended color shades
Application:
Airless spray, brush or roller
Coverage on concrete:
275-325 SF per gallon (low pigment stain covers more area)
Packaging:
Quart, gallon, and 4 gallon plastic bucket
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
| Greenguard Gold | YES |
| EPD | YES |
| Sustainability Data Sheet | YES |
Downloads
CONCRETAL—W Sol-silicate Paint for Concrete
Use Concretal-W, in a complimentary base color, to provide a weather resistant and uniform mineral base coat to enhance the metallic effect. Finish with one or two coats of Design Metallic Finish for adurable and glistening finish.
DESIGN FIXATIVE/DILUTION
Concretal Fixative is a pure sol-silicate clear mixture used to dilute/thin the first coat of Concretal-W Sol-Silicate Paint. Fixative lowers the viscosity of the first coat to aid in deeper penetration, and addition up to 10% max of Fixative provides more open working time to help maintain a wet edge in warmer application temperatures. Use also as a pre-treatment and mild consolidation for aged and weathered concrete surfaces where uneven porosity and absorption are likely
Colors:
Milky white, dries crystal clear
Application:
Airless spray, brush or roller
Coverage on concrete as a pretreatment:
100—200 SF per gallon
Packaging:
1.3 gal (5 liter) and 5.3 gal (20 liter) plastic jerry can
Environmental Compliance:
| EPA | YES |
| LEED | YES |
| CARB | YES |
| SCAQMD | YES |
